Hello Bill,
Please find below step-by-step instructions for setting up a wireless network
on your Stream.
1. Press the online key, the key between the goto key (left. and the bookmark
key (right.
2. Press the 7 key and you'll hear "Menu, wireless, airplane mode"
3. Make sure airplane mode is off by pressing the 6 key until you hear off,
then press the confirm button to the right of the 0.
4. Press the 7 key again and you'll hear "Menu, wireless, airplane mode off"
5. Press the 8 key until you hear "Scan for available connections" and then
press the confirm key to the right of the 0.
6. You'll then be taken to a menu where you hear your wireless network names.
Press the 2 or 8 keys until you hear your network id and then press the
confirm key.
7. Enter your network password. To change the case of letters, press the
bookmark key. You'll find special keys like periods, commas, slashes by
pressing the 1 key multiple times. Twice for a period, three times for a
comma, etc. You'll find other symbols, such as the exclamation mark, at-sign,
and pound sign by pressing the 0 key multiple times. The stream user's guide
has a complete list of each symbol and how many times you need to press the 0
or 1 key to find that symbol.
8. After entering the password, press the confirm key. The stream will then
try and connect to your wifi.
9. Enter a name to save this network connection as, so you can find it in the
"Launch network connections" item of the wireless menu.
10. At this point, you should be on your network. You can test your network
by pressing the 7 key to go into the wireless menu, and press the 2 key to
hear "validate connection." Then, press the confirm key and wait. If all
goes well, you'll hear a message from HumanWare, which is also saved in your
$VRText folder.
I hope the above is helpful. Now you can enjoy listening to the vast array of
podcasts, internet radio stations and search on Wikipedia and Wiktionary. You
can also have the Stream update firmware over your wireless network. Make
sure this feature is turned on in the menu.
Best wishes,
Clive Pallett
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
