[access-uk] Plextalk Pocket firmware upgrade problem

  • From: "Jackie Cairns" <jackie.cairnsplace@xxxxxxxxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 10 Jun 2011 11:49:00 +0100

Hi everyone,

The Plextalk Pocket, PTP1, has a new firmware update available from the
Plextor website.  I decided to download and upgrade my unit, but it doesn't
seem to want to update.

I downloaded the exe file to my PC as instructed, extracted the files, and
copied the verup folder to the SD card which came with my Plextalk Pocket.
I turned on the unit with it connected to the mains, all as instructed, and
it just told me there was no content on the SD card, in other words not
recognising the update folder when I turned on the device.

I have tried putting the card into my reader on the PC and copying the
folder, and I have also done it by leaving the card in the device and
hooking it up via USB to the PC and extracting everything directly from the
card.  Still it won't recognise the folder verup.

Has anyone got any suggestions please, or had the same issue?  If so, how
did you get round it?  The firmware version currently on my PTP1 is 4.0, but
I want it upgraded if possible.

Thanks in anticipation of any help.

Kind Regards,

Jackie Cairns
J&M Work-Ability


** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: