Jackie, to my limited knowledge, Jim Snowbarger's scripts have been developped quite substantially by now so, if you're prepared to buy them, JAWS will work quite well with SF9. I'd be very surprised if SF9 didn't work with Vista. Cheers, From Ray I can be contacted off-list at: mailto:ray-48@xxxxxxxx -----Original Message----- Jackie Cairns Subject: [access-uk] Re: Difference between Soundforge and Goldwave? Could I please chip in here to ask a question? How well does SF 9 work with the latest JFW release, 9.0, and does the latest SF work on Vista Home Premium? (Sorry, that was two questions) (smiles). Many thanks. Jackie ----- Original Message ----- From: "Ray's Home" <rays-home@xxxxxxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Friday, January 04, 2008 11:04 AM Subject: [access-uk] Re: Difference between Soundforge and Goldwave? > Ari, maybe you've had a few replies by now, but I'l make a few > comments re. differences between Sound Forge and Goldwave. > > Most importantly, SF is now a multi-channel recorder. I think you can > record eight channels simultaniously in SF9. (Note, this is not > multi-track recording but multi-channel recording; i.e. you can > record all eight at once but not monitor tracks and record on discrete > tracks at the same time, least think that's how it works.) You can of > course mix down multi-channel to stereo. All this is meant for live > work and surround sound in particular. > > SF has always had the finest noise reduction around, and I believe it > comes bundled with SF9. It maybe that you can actually use an older > version of SF noise reduction with Goldwave as I believe it > accomodates plug-ins. > > I think both programs can separate out vocal tracks, but always rather > hit and miss as it depends to an extent on how the original was mixed. > I think Goldwave does allow for pretty good pitch shifting and time > compression. i.e. speeding up without pitch change - or slowing down. > Sound Forge probably is better at this, but cannot say for certain. > I've used it a fair bit to get anoying over-runs of a couple of > minutes onto Cds and cassettes, and you'd be hard pressed to know in > most instances. > > Finally, do remember that there is also Sony Sound Studio, a cut down > version of Sound Forge. This most likely will do all you need, but it > is, like Goldwave, a stereo only editor. I've no idea whether JFW > scripts are available for it, but I got my copy of Sound Studio for > £37.00 which is quite a bargain, and it is pretty easy to work with. > Like Sound Forge it has the k j l keys for speeding up and slowing > down material for better reviewing, good for voice work. > > Very final thought, there is also Studio Recorder from APH in the US > and they will deal with you by phone. Currently that sells for around > $200.00 and is designed to work from the ground up with screen readers > and needs no heavy scripting, or probably none at all. > > HTH. > > Ray. > > From Ray > I can be contacted off-list at: > mailto:ray-48@xxxxxxxx > > > -----Original Message----- > ari > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Difference between Soundforge and Goldwave? > > > Hi all, > What can soundforge do that Goldwave can't, why does SF cost so much > more > and how accessible is it with JAWS 8? The reason I'm asking, is I > don't > think Goldwave is exactly what I want, and am looking for other > programs > because I'm really keen on learning to do all sorts of things with > audio. > For example, I haven't seen an option in Goldwave, is it possible to, > if I'm > listening to artist such as Mango Groove or Dido, to separate the > music > channel from the voice, take Dido's voice and put her together with > another > beat? I'd also like to change speed without changing the pitch and I > don't > think Goldwave is allowing me to do that either, or is it impossible > to > change the speed of something while keeping pitch? There must be > programs > that can do this, since these things are recorded in different tracks, > is > soundforge the answer, or can I actually do this in Goldwave but can't > figure out how? > Ari ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq