[access-uk] Re: 3 Connect
- From: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 15 Mar 2009 16:22:48 -0000
Hi.
That keystroke is specific to the three connection manager, you can find a list
of keystrokes in the three connect user guide which should be in the program
group under three USB Modem.
All the best, Ibrahim.
----- Original Message -----
From: Tony Sweeney
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 4:21 PM
Subject: [access-uk] Re: 3 Connect
Hi Ibrahim,
It worked not only for 'connect but for 'disconnect too!
After pressing alt and C I hit the left mouse button.
Now as a matter of interest is that a windows or a Jaws keystroke?
Thanks a Mil for that.
Tony
----- Original Message -----
From: Ibrahim Gucukoglu
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 4:12 PM
Subject: [access-uk] Re: 3 Connect
Hi Tony.
Try alt and C, that should activate the connect button if I'm not mistaken.
----- Original Message -----
From: Tony Sweeney
To: access-uk@xxxxxxxxxxxxx
Sent: Sunday, March 15, 2009 3:51 PM
Subject: [access-uk] 3 Connect
Hi All,
Was a little premature with my last message to the list I'm afraid!
The left mouse button doesn't always work with connect/disconnect from
the 3 mobile broadband using ZTE modem.
It's a bit hit and miss now really.
However when you are on the ZTE when you route jaws to PC and then
down/uparrow it gives you good enough information of it''s status and you then
find the disconnect/connect button go off that and go back on it again then
hitting the left mouse button for it to respond for you.
Anyway at least that works for me!
Tony
Other related posts:
