Mark, Wireless is fine for reading the mail in the sitting room on the laptop, but personally you would be better connecting your machine on a wire for serious use. Cheers Andrew > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx > [mailto:access-uk@xxxxxxxxxxxxx]On Behalf > Of Andrew Hodgson > Sent: 13 April 2005 19:05 > To: access-uk@xxxxxxxxxxxxx > Subject: [access-uk] Re: 2 meg over wireless > > > Hi, > > The 802.11B gives you 11MBPS over the link, the 802.11G > gives you 54MBPS > over the link. I will leave it up to you to decide whether > you need to > fork out for the new hardware. > > Thanks. > Andrew. > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx > [mailto:access-uk@xxxxxxxxxxxxx] On Behalf > Of Mark Threadgold > Sent: 13 April 2005 18:42 > To: accessuk list > Subject: [access-uk] 2 meg over wireless > > Hi all. > > I will shortly be upgraded to the NTL 2 Meg cable broadband. > > I currently have a Belkin 802.11b wireless router connected > to the set > top box and all works nicely. > > Will the 11 Mbps of the wireless network cope ok with the > two and a half > times speed increase in the broadband connection? > > Basic question I suppose is do I need to upgrade to an > 802.11G setup to > make use of the increase in broadband speed? > > Regards, > > Mark Threadgold > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq