[windows2000] Re: Legacy Help
- From: "Robert K Coffman Jr - Info From Data Corporation" <bcoffman@xxxxxxxxxxxxxxxx>
- To: <windows2000@xxxxxxxxxxxxx>
- Date: Wed, 12 May 2004 08:56:30 -0400
Online Spyware ScanJennifer,
I think you can accomplish this by building the boot floppies, then
replacing the ATAPI.SYS file with the newer one. I think I had to do this
many moons ago...
- Bob Coffman
-----Original Message-----
From: windows2000-bounce@xxxxxxxxxxxxx
[mailto:windows2000-bounce@xxxxxxxxxxxxx]On Behalf Of Jennifer Hooper
Sent: Tuesday, May 11, 2004 6:30 PM
To: 'windows2000@xxxxxxxxxxxxx'
Subject: [windows2000] Legacy Help
I know this is a 2k list, but a lot of us out there still must use NT4. I
need to know if there is some way that I can slipstream in an SP4 cd into an
NT4 Server installation CD. Here's why: (and if you can help me out here
too, bonus points) I have to rebuild a generic black box server with NT4 on
it to support Siebel. I finally got 2 20G Western Digital drives installed
in it, and they are recognized. But when I try to install NT4, they come up
as 7.8G drives. A KB article I found says that SP4 has an updated Atapi.sys
that will allow formatting of large hard drives. And I *reallllly* need
these larger drives. So if anyone can help me out, you'll get a virtual
beer.
Thanks much,
Jennifer
Jennifer Hooper
Peregrine Systems, Inc.
Sr. Network Engineer
mailto:jennifer.hooper@xxxxxxxxxxxxx
Other related posts:
