Charles R. Buchanan wrote:
Just given two of these servers and was wondering what you guys think. First of all, I've always wanted my very own server to play with, but of course never had the money to actually do this. :-) (Seeing in its day, the 6300 could set one back $40g's) <snip>
As far as the cpu(s) and memory, I haven't a clue right now. I'm scare to plug the doggone thing in actually. Just the server itself takes three power cords. :-O Needless to say, this thing won't be running 24/7! :-D
Here are some specs. By today's standard, the horsepower ain't much... The PowerEdge 6300 systems offer the following major features: * One to four Intel Pentium II Xeon microprocessors with an internal operating frequency of 400 megahertz (MHz) and an external bus speed of 100 MHz.The Pentium II Xeon microprocessor includes MMX® technology designed to handle complex multimedia and communications software. This microprocessor incorporates new instructions and data types as well as a technique called /s/ ingle /i/ nstruction, /m/ ultiple /d/ ata (SIMD) that allows the microprocessor to process multiple data elements in parallel, thereby improving overall system performance.
* A secondary (L2) cache of 512 kilobytes (KB) to 2 MB of static random-access memory (SRAM) is included within the single-edge contact (SEC) cartridge that contains the microprocessor. Math coprocessor functionality is internal to the microprocessor. * Support for symmetric multiprocessing (SMP) is available by installing up to three more Pentium II Xeon microprocessors. /SMP/ greatly improves overall system performance by dividing microprocessor operations among the independent microprocessors. To take advantage of this feature, you must use an operating system that supports multiprocessing, such as Microsoft® Windows NT® 4.0 or Novell® NetWare® 4.11 (and later versions). * A minimum of 128 MB/ /of system memory, upgradable to a maximum of 4 GB by installing combinations of 32-, 128-, and 256-MB buffered extended-data out (EDO) dual in-line memory modules (DIMMs) in the /16/ DIMM sockets on the memory board. * A basic input/output system (BIOS) that resides in flash memory on the Peripheral Component Interconnect (PCI) bus and can be upgraded if required. * Up to six, hot-pluggable, 1.6-inch, small computer system interface (SCSI) hard-disk drives. Two additional 1-inch drives can be installed in the optional removable media bay. These additional drives are not hot-pluggable. * Three redundant, hot-pluggable power supplies and power/ -/ supply paralleling board /(PSPB)/ . /NOTE: A minimum of two power supplies are needed to run the system./ * Five redundant system cooling fans. The system board includes the following built-in features: * Seven PCI connectors;/ (4) /64-bit and /(3)/ 32-bit. * A video graphics array (VGA)-compatible video subsystem with an ATI 3D Rage Pro super VGA (SVGA) video controller. This video subsystem contains 2 MB of synchronous graphics random-access memory/ /(SGRAM) video memory (nonupgradeable). Maximum resolutions are 1024 x 768 with 256 colors noninterlaced. In 800 x 600 and 640 x 480 resolutions, 16.7 million colors are available for true-color graphics. * A/ /National Semiconductor PC87309 super input/output (I/O) controller that controls the bidirectional parallel port, two serial ports, and the diskette drive in the externally accessible front bay. The parallel port can be set to operate in the following modes via the Parallel Mode category in the System Setup program: output-only (AT-compatible) or bi-directional (Personal System/2 [PS/2]-compatible). * Two Adaptec AIC-7890 Ultra2/LVD SCSI host adapters that support up to /six, 1.6-inch/ , internal SCSI hard-disk drives via a SCSI backplane board and special SCSI hard-disk drive carriers. The SCSI backplane automatically configures SCSI identification (ID) numbers and SCSI termination on individual hard-disk drives, greatly simplifying drive installation. A hot-pluggable 1 x 6 SCSI backplane board supports hot-pluggable SCSI hard-disk drive installation and removal when used inconjunction with the PowerEdge Expandable RAID controller.
* An Adaptec AIC-7860 Ultra/Narrow SCSI-III host adapter that supports up to three externally accessible SCSI devices in the external hard-disk drive bays (for example, CD-ROM drive, tape drive unit). * Server management circuitry that monitors operation of the system fans as well as critical system voltages and temperatures. The server management circuitry works in conjunction with the HP OpenView Network Node Manager Special Edition (NNM Special Edition) and the Dell OpenManage Hardware Instrumentation Package (HIP) software package. * System board support for the Dell OpenManage Remote Assistant when the optional Dell Remote Assistant Card version 2.0 (DRAC 2) is installed, which provides additional local and remote server management. * A PS/2-style keyboard port and a PS/2-compatible mouse port.Standard PowerEdge 6300 systems include a 3.5-inch diskette drive and a SCSI CD-ROM drive installed in the externally accessible bays and a SCSI hard-disk drive installed in slot 0.
System manuals available at: http://support.dell.com/support/edocs/systems/semer/en/index.htm
-- 73 ------------------------------------- Jim Walls - K6CCC jim@xxxxxxxxx Ofc: 818-548-4804 http://home.earthlink.net/~k6ccc AMSAT Member 32537 - WSWSS Member 395 ***************************** New Site from The Kenzig Group!Windows Vista Links, list options and info are available at:
http://www.VistaPop.com***************************** To Unsubscribe, set digest or vacation
mode or view archives use the below link. http://thethin.net/win2000list.cfm