[windows2000] Compression on DAT 20/40 Drive....
- From: "Steve Rance" <Steve.Rance@xxxxxxxxxxxxxxxxxxxxx>
- To: "Windows2000 Mailing List (E-mail)" <Windows2000@xxxxxxxxxxxxx>
- Date: Thu, 8 May 2003 08:41:32 +0100
Hi All,
I have a question regarding the backing up of our Windows 2000 Exchange =
Server. It uses Backup Exec 8.60 to backup the Information Store and =
Mailboxes to a fairly new DAT 20/40 drive using DDS4 150 metre tapes. =
The compression is set within Backup Exec to use Hardware.
The problem I have is it will only ever backup 20Gb onto the tape before =
saying the tape is full and prompting for another one. I need to backup =
about 30Gb of data. Can anyone tell me why I can't get more than 20Gb =
on to a tape, because from my understanding I could be able to get =
closer to 40Gb with compression.
Any ideas?
Thanks
> Steve Rance
> IT Manager
> Daly International
> This e-mail is confidential and is intended solely for the use of the =
individual or entity to whom it is addressed. If you are not the =
intended recipient and you have received this e-mail in error then any =
use, dissemination, forwarding, printing or copying of this e-mail is =
strictly prohibited and you should contact the sender by e-mail and then =
delete all material from your system.=20
> Any views or opinions expressed in this message are those of the =
individual sender, except where the sender expressly, and with =
authority, states them to be the views of Daly International.=20
> This e-mail does not form part of a legally binding agreement. We have =
taken precautions to minimise the risk of transmitting software viruses, =
but we advise that you carry out your own virus checks on any attachment =
to this message. We cannot accept liability for any loss or damage =
caused by software viruses
>=20
>=20
>=20
==================================
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
Other related posts:
