[windows2000] Re: Compaq 350ML server array config

  • From: "Leitman, Ken" <ken.leitman@xxxxxxxx>
  • To: <windows2000@xxxxxxxxxxxxx>
  • Date: Wed, 22 Sep 2004 16:26:27 -0400

This is probably that your disk is set to "basic" and would need to be
"dynamic". Just rememeber this is a one way process,
kl

-----Original Message-----
From: windows2000-bounce@xxxxxxxxxxxxx
[mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Herchenbach, Jim
Sent: Tuesday, September 21, 2004 4:02 PM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] Compaq 350ML server array config

I have a compaq 350ML server with 3-36.4 arrayed drives.  I'm trying to
install a 4th to this array....and essentially extend the existing
Drive.  I go thru the compaq wizard and it says "Windows 2000 does not
support extending existing drives"  Do you want to continue?

Should I be concerned about this?  I thought windows 2000 did support
this.  Any help would be appreciated. 


JIM HERCHENBACH
RVW Inc.
 


********************************************************
This Weeks Sponsor StressedPuppy.com Games Feeling stressed out? Check
out our games to relieve your stress.
http://www.StressedPuppy.com
********************************************************
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/win2000list.cfm


-----------------------------------------
The information contained in this transmission may contain privileged and 
confidential information and is intended only for the use of the person(s) 
named above. If you are not the intended recipient, or an employee or agent 
responsible for delivering this message to the intended recipient, any review, 
dissemination, distribution or duplication of this communication is strictly 
prohibited. If you are not the intended recipient, please contact the sender 
immediately by reply e-mail and destroy all copies of the original message. 
Please note that we do not accept account orders and/or instructions by e-mail, 
and therefore will not be responsible for carrying out such orders and/or 
instructions.
If you, as the intended recipient of this message, the purpose of which is to 
inform and update our clients, prospects and consultants of developments 
relating to our services and products, would not like to receive further e-mail 
correspondence from the sender, please "reply" to the sender indicating your 
wishes.  In the U.S.: 1345 Avenue of the Americas, New York, NY 10105.


********************************************************
This Weeks Sponsor StressedPuppy.com Games
Feeling stressed out? Check out our games to
relieve your stress.
http://www.StressedPuppy.com
********************************************************
To Unsubscribe, set digest or vacation
mode or view archives use the below link.

http://thethin.net/win2000list.cfm

Other related posts: