Hi all, I've recently managed to get my hands on a used HP Netserver E60, to offload the current DC-fileserver combo. The fileserver will be demoted and do only fileserving, while the "new" HP will do only domain controlling stuff. To my surprise the HP is a dual-cpu machine! It currently runs only one slotted PIII/500, and the other slot is free for an additional cpu. Now, would I, or rather win2k3 server std, benefit at all if I manage to find another p3/500 to install? The HP will as I mentioned only do DC-stuff, ie replicating, speaking to the others DCs and so on, not much else, hence me getting such a low-powered machine. I've not been able to find any info on the slotted p3/500-cpu's regarding the smp capabilities, so would anybody know if I can just add another regular slotted p3/500? It just so happens that we have another old dell-desktop with a possible suitable cpu, which I might be able to de-cpuify... Thx for any info. BW, Sorin > Sorin Srbu, Systems Engineer Web: http://www.farmfak.uu.se/organisk/ > Dept of Medicinal Chemistry, Phone: +46 (0)18-4714482 >> 3 signals > >> GSM > Div of Org Pharm Chem, Mobile Phone: +46 (0)701-718023 > Box 574, Uppsala University, Fax: +46 (0)18-4714474 > SE-751 23 Uppsala, Sweden Visit: BMC, Husargatan 3, D5:512b > > Public PGP key available on request. > > () ASCII ribbon campaign - Against html E-mail > /\ > > Harmless tagline follows: > > BOFH excuse follows: Sysadmin accidentally destroyed pager with a large > hammer. ******************************************************** This Weeks Sponsor StressedPuppy.com Games Feeling stressed out? Check out our games to relieve your stress. http://www.StressedPuppy.com ******************************************************** To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/win2000list.cfm