[visurfacereader] Re: Have you given up on the Digi003?:-)
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <visurfacereader@xxxxxxxxxxxxx>
- Date: Wed, 14 Jan 2015 21:35:18 -0000
Hi Bryan,
I understand that this unit is discontinued, but it has a couple of behaviours
I expect to encounter elsewhere (notably sending multiple messages for a single
button press), so it’ll still be a useful device to test against.
Best wishes.
Tim Burgess
From: visurfacereader-bounce@xxxxxxxxxxxxx
[mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Bryan Smart
Sent: 14 January 2015 19:11
To: visurfacereader@xxxxxxxxxxxxx
Subject: [visurfacereader] Re: Have you given up on the Digi003?:-)
Should seriously demote priority for ProjectMix compatibility. It has been
discontinued hardware for several years now. I’m not even certain that it has
current 64-bit drivers on Mac. Doubt we’ll see Windows support for it beyond
Win7.
Bryan
On Jan 14, 2015, at 8:08 AM, Tim Burgess <tim@xxxxxxxxxxxxx> wrote:
Hi,
No, I definitely haven't given up on this - I have a technical issue here
that's preventing me from building SurfaceReader at all, so I'm working on
fixing that then I'll definitely be hooking up with you to take a look. The
Project Mix will be interesting to test as well, but let's get as far as the
Digi first.
Apologies for all of this delay - I've been trying to earn a living writing
other software, but I should have reported back earlier to let everybody know
that SurfaceReader has not been abandoned.
Best wishes.
Tim Burgess
-----Original Message-----
From: visurfacereader-bounce@xxxxxxxxxxxxx
[mailto:visurfacereader-bounce@xxxxxxxxxxxxx] On Behalf Of Krister Ekstrom
Sent: 14 January 2015 10:54
To: visurfacereader@xxxxxxxxxxxxx
Subject: [visurfacereader] Have you given up on the Digi003?:-)
Hi there,
This is Krister Ekstrom nagging you again about the Digi003. Any news? I have
downloaded and set up Teamviewer here which would mean that you could get at my
computer if needed. I have heard that it’s accessible but i don’t know. Would
it help in any way if i switched to the M-Audio Project mix control surface
that has the HUI protocol in it, would i get more feedback from that one?
Best
/Krister
Other related posts:
