thank, Christophe. But I work with LINUX. Do you have a linux version (binaries?) merci christoph On Mon, 2003-02-03 at 16:22, Pallier Christophe wrote: > > On Mon, 3 Feb 2003, Christoph Lehmann wrote: > > > o.k. on pin 12 (0x20) I measured +5V. when I "bind" it down to 0V (pin > > 25 is grounded to 0V-conncected with ground of the signal generator) > > nothing happens with VE: VE always sees "32" (suppose this means > > 2power5).... > > so either the VE code doesn't work properly with my thinkpad (although I > > run VE as su) or....do I need to change the LPT settings in the bios? > > You should really try the LPT.EXE program available (as a floppy > disk image EXPE.BIN) at > http://www.pallier.org/ressources/timelpt/timelpt.html > > As it displays the values of all the bits of the parallel port, and show > when they change, it will help determine if the problem is with > the parallel port or with the software (windows or VE). > > Christophe Pallier > www.pallier.org > > > ====================================== > The Vision Egg mailing list > Archives: //www.freelists.org/archives/visionegg > Website: http://www.visionegg.org/mailinglist.html -- Christoph Lehmann Department of Psychiatric Neurophysiology University Hospital of Clinical Psychiatry Waldau CH-3000 Bern 60 Switzerland Phone: ++41 31 930 93 83 Mobile: ++41 31 570 28 00 Fax: ++41 31 930 99 61 Email: lehmann@xxxxxxxxxxxx Web: http://www.puk.unibe.ch/cl/pn_ni_cv_cl.html ====================================== The Vision Egg mailing list Archives: //www.freelists.org/archives/visionegg Website: http://www.visionegg.org/mailinglist.html