[visionegg] paralle port: voltage measured by oscilloscope

From: Christoph Lehmann <lehmann@xxxxxxxxxxxx>
To: visionegg@xxxxxxxxxxxxx
Date: Mon, 03 Feb 2003 13:12:26 +0100

o.k. on pin 12 (0x20) I measured +5V. when I "bind" it down to 0V (pin
25 is grounded to 0V-conncected with ground of the signal generator)
nothing happens with VE: VE always sees "32" (suppose this means
2power5)....
so either the VE code doesn't work properly with my thinkpad (although I
run VE as su) or....do I need to change the LPT settings in the bios?

thanks
christoph

======================================
The Vision Egg mailing list
Archives: http://www.freelists.org/archives/visionegg
Website: http://www.visionegg.org/mailinglist.html

Follow-Ups:

[visionegg] Re: paralle port: voltage measured by oscilloscope
From: Pallier Christophe

References:
- [visionegg] Re: parallel port 2nd
  - From: Christoph Lehmann
- [visionegg] Re: parallel port 2nd
  - From: Christoph Lehmann

[visionegg] paralle port: voltage measured by oscilloscope

Other related posts: