My experience has been that the most reliable way to set the time is to
use the cursor routing buttons. Position the cursor in the cell
immediately following the digits you need to change. Delete the unwanted
numbers with backspace and write the new value. Press Command to save
the change.
--
Dave
On 23/03/2017 10:52, Amy Ruell wrote:
Hello, please let me know what version of the software you are running. You
can find this by going to be help menu and then selecting about. If you are
running version 1.33 or later, you should be able to put in the normal date
and time keys in contracted braille.
Amy Ruell Baum USA
Sent from my iPhone
On Mar 23, 2017, at 2:38 AM, Vaughan Dodd <vdodd001@xxxxxxxxxxxxxx> wrote:
Hi all.
I am currently evaluating a Varioultra 20 cell, and I like what I have
discovered.
However: one problem is infuriating me. I cannot set time and date.
The manual that I have isn't as helpful as I would like. I cannot tell
whether I must enter details in computer braille or not, and after several
attempts, I continue to receive messages such as invalid date or cannot set
date and time.
The instructions do seem simple enough, and usual date and time syntax seems
to be what is required, but after entering everything, and pressing d9, the
errors mentioned above come up.
Suggestions please?
Thanks.
Vaughan.
