[THIN] Re: OT: Wyse winterm - reflashing 3360SE
- From: "Jeff Stockard" <jstockard@xxxxxxxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 6 Apr 2004 08:32:32 -0400
Sorry, I don't know anything about Netxfer, but...
The WYSE web site has step by step instructions for upgrading the flash.
Just copy the flash upgrade to your network. Share the folder where the
flash is stored. Boot up the 3360. I think you need to press the f2
key to get to the configuration screen. Go to the Upgrade tab. Type
the path to the flash upgrade and click OK (I think that is what the
button says). If you have to have more than one flash upgrade, put them
in successive folders. On the next boot, add to the path.
Hope this helps
Jeff
Jesus Loves You
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Tom Howarth
Sent: Tuesday, April 06, 2004 5:08 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Wyse winterm - reflashing 3360SE
Hi Kevin
You can't use netxfer on the 3360 models you need a tool called xfer and
a parallel uplink cable. Mail me off list for details
Regards,
Tom
tom@xxxxxxxxxxxxx
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Kevin Hopley
Sent: 06 April 2004 00:40
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Wyse winterm - reflashing 3360SE
Hi Tom
Thanks for the reply. Done the usual P key stuff and worked with a =3D3D
Wyse3200 but can't get it to run on the 3360. Any thoughts?
Kev
-----Original Message-----
From: Tom Howarth [mailto:tom@xxxxxxxxxxxxx]
Sent: 02 April 2004 17:22
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Wyse winterm - reflashing 3360SE
Reboot the device, and keep the p key depressed. =3D3D3D20
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Kevin Hopley
Sent: 02 April 2004 17:00
To: thin@xxxxxxxxxxxxx
Subject: [THIN] OT: Wyse winterm - reflashing 3360SE
Sorry to ask,
But does anyone know how to start the flash upgrade of a WYSE winterm =
=3D
=3D3D
=3D3D3D
=3D3D3D3D
3360 using the netxfer utility... or is there another method.
Cheers
Kev Hopley
********************************************************
This weeks sponsor Emergent Online.
Emergent OnLine is the leading server-based computing consulting
integration firm in the nation. Emergent OnLine delivers expert=3D3D3D20
consulting services you can depend on.
http://www.go-eol.com
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or=3D3D3D20
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
********************************************************
This weeks sponsor Emergent Online.
Emergent OnLine is the leading server-based computing consulting =3D3D
integration firm in the nation. Emergent OnLine delivers expert=3D3D20
consulting services you can depend on.
http://www.go-eol.com
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or=3D3D20
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - RTO Software / TScale
What's keeping you from getting more from your terminal servers? Did you
know, in most cases, CPU Utilization IS NOT the single biggest
constraint to scaling up?! Get this free white paper to understand the
real constraints & how to overcome them. SAVE MONEY by scaling-up rather
than buying more servers.
http://www.rtosoft.com/Enter.asp?ID=3D3D147
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - RTO Software / TScale
What's keeping you from getting more from your terminal servers? Did you
know, in most cases, CPU Utilization IS NOT the single biggest
constraint to scaling up?! Get this free white paper to understand the
real constraints & how to overcome them. SAVE MONEY by scaling-up rather
than buying more servers.
http://www.rtosoft.com/Enter.asp?ID=3D147
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
********************************************************
This Week's Sponsor - RTO Software / TScale
What's keeping you from getting more from your terminal servers? Did you
know, in most cases, CPU Utilization IS NOT the single biggest
constraint to scaling up?! Get this free white paper to understand the
real constraints & how to overcome them. SAVE MONEY by scaling-up rather
than buying more servers.
http://www.rtosoft.com/Enter.asp?ID=147
**********************************************************
Useful Thin Client Computing Links are available at:
http://thin.net/links.cfm
***********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thin.net/citrixlist.cfm
Other related posts:
