[THIN] Re: OT: Perc raid card problem
- From: "JimmyZ" <jim@xxxxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Fri, 7 Nov 2003 14:21:22 -0800
Call Dell
Jim Zangara, MCSE+I
West Coast IT Manager
Special Projects Engineer
Premiere Radio Networks
A Division of Clear Channel Communications
15260 Ventura Blvd Suite 500
Sherman Oaks, CA 91403
Direct: (818) 461-8620
mailto:jzangara@xxxxxxxxxxxxxxxxx <mailto:jzangara@xxxxxxxxxxxxxxxxx>
And I alone am returned to wag the tail.
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Boggan
Sent: Friday, November 07, 2003 2:11 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: OT: Perc raid card problem
I tried telling it to read config from disk and it looks like it
works, but then when it boots up I get a disk read error.
_________________________________
Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com
<http://www.virtualdesktopinc.com/>
_________________________________
-----Original Message-----
From: Rowlandson, John [mailto:John.Rowlandson@xxxxxxxxxxxxx]
Sent: Friday, November 07, 2003 4:07 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: Perc raid card problem
Mallesons Stephen Jaques
www.mallesons.com
Confidential communication
you should be able to tell it to "read config from disk"
there is a known issue on perc 3's (newer high end ones) and a
few other models that take multiple drives offline at random underload
and there is a new firmware for it
John Rowlandson
Technical Support Specialist
Mallesons Stephen Jaques
Sydney
T +61 2 9296 3653
F +61 2 9296 3999
john.rowlandson@xxxxxxxxxxxxx
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Michael Boggan
Sent: Saturday, 8 November 2003 8:56 AM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] OT: Perc raid card problem
I had a raid card go bad in a server. I replaced it
with another and now I can't get it to see the pervious drive configs.
How can I reconfigure this card to see the old drive configuration?
_________________________________
Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com
<http://www.virtualdesktopinc.com/>
_________________________________
Other related posts:
