Reinstall the driver. Get http://thethin.net/pdmanager.zip to delete it first and then install fresh. Also check your permissions to be sure users have access to the dlls to run the driver. Can be done using filemon from sysinternals. JK -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Adam.Baum@xxxxxxxxxxxxxx Sent: Friday, June 20, 2003 1:49 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] HP4000T driver I am experiencing a strange printer problem. I have three queues setup for the HP4000T. My print server is an HP4200 print appliance. All the drivers for the queues are the same. Two of the queues generate errors when viewing the properties page, the third queue does not. Security is set the same on all of them. Any ideas? The error in question comes from \winnt\explorer.exe and is: Function address 0x10023798 caused a protection fualt. (exception code 0xc00000005) Some or all property page(s) may not be displayed. W2K SP3 XPe FR2. adam ******************************************************** This weeks sponsor - RTOSoft TScale Complaints about applications response time - DO SOMETHING ABOUT IT! TScale 2.0 improves applications response time and increases terminal server capacity. Really get MORE from your existing servers! Free eval: http://www.rtosoft.com/enter.asp?id=130 ********************************************************** Useful Thin Client Computing Links are available at: http://thethin.net/links.cfm For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm