[THIN] Re: CMC Problems with FR3 upgrade
- From: Michael Boggan <MBoggan@xxxxxxxxxxx>
- To: "'thin@xxxxxxxxxxxxx'" <thin@xxxxxxxxxxxxx>
- Date: Mon, 15 Sep 2003 15:26:49 -0500
hmmmm i thought it was. is there a way to load it on the servers that don't
have it, from the FR3 CD?
_________________________________
Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com <http://www.virtualdesktopinc.com/>
_________________________________
For Technical Support during business hours please send email to
support@xxxxxxxxxxx or call the above toll free number for afterhours
support.
-----Original Message-----
From: Ron Oglesby [mailto:roglesby@xxxxxxxxxxxx]
Sent: Monday, September 15, 2003 2:01 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: CMC Problems with FR3 upgrade
It sounds to me like RM is not installed on those machines.
Ron Oglesby
Senior Technical Architect
RapidApp
Office 312.372.7188
Mobile 815.325.7618
email roglesby@xxxxxxxxxxxx <mailto:roglesby@xxxxxxxxxxxx>
-----Original Message-----
From: Michael Boggan [mailto:MBoggan@xxxxxxxxxxx]
Sent: Monday, September 15, 2003 12:53 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] CMC Problems with FR3 upgrade
I sent this out last week but here is a little more info. Hopefully someone
can help with this. It is driving me nuts.
We have aabout 18 servers. We built the 1st 11 with XP 1.0 CD. then
installed FR1. Now we are upgrading them to FR3 and Loading all new servers
from 12 on, with the FR3 CD. If i go into the CMC and then Servers, then
highlight an old server, i don't get all of the added features from FR3 such
as the Reboot Schedule, etc. But if I look at properties of one of the
newer servers built with the FR3 cd then the reboot schedule and other new
features are there. Also, with the Reboot Schedule feature, if i choose
apply to other servers, it only lists the newer servers. I have checked the
Set Feature release option and it is set to FR3 and I have checked the
Product Code. It is all set properly.
Anyone have any ideas on this. I need to get this fixed asap.
Thanks,
_________________________________
Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com <http://www.virtualdesktopinc.com/>
_________________________________
For Technical Support during business hours please send email to
support@xxxxxxxxxxx or call the above toll free number for afterhours
support.
Other related posts:
