[THIN] Re: CMC Problems with FR3 upgrade

Never tried it. But I assume you could us the FR3 and see if you can
modify the install.

 

Ron Oglesby

Senior Technical Architect

 

RapidApp

Office 312.372.7188

Mobile 815.325.7618

email roglesby@xxxxxxxxxxxx

 

-----Original Message-----
From: Michael Boggan [mailto:MBoggan@xxxxxxxxxxx] 
Sent: Monday, September 15, 2003 3:27 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] Re: CMC Problems with FR3 upgrade

 

hmmmm i thought it was.  is there a way to load it on the servers that
don't have it, from the FR3 CD?

 

_________________________________

Michael Boggan
Network Engineer/Citrix Admin
Virtual Desktop Inc.
Dallas, Texas
Ph: (972) 960-6400
Fax: (972) 960-6445
email: mboggan@xxxxxxxxxxx
http://www.virtualdesktopinc.com <http://www.virtualdesktopinc.com/> 
_________________________________

For Technical Support during business hours please send email to
support@xxxxxxxxxxx or call the above toll free number for afterhours
support.

        -----Original Message-----
        From: Ron Oglesby [mailto:roglesby@xxxxxxxxxxxx]
        Sent: Monday, September 15, 2003 2:01 PM
        To: thin@xxxxxxxxxxxxx
        Subject: [THIN] Re: CMC Problems with FR3 upgrade

        It sounds to me like RM is not installed on those machines.

         

        Ron Oglesby

        Senior Technical Architect

         

        RapidApp

        Office 312.372.7188

        Mobile 815.325.7618

        email roglesby@xxxxxxxxxxxx

         

        -----Original Message-----
        From: Michael Boggan [mailto:MBoggan@xxxxxxxxxxx] 
        Sent: Monday, September 15, 2003 12:53 PM
        To: 'thin@xxxxxxxxxxxxx'
        Subject: [THIN] CMC Problems with FR3 upgrade

         

        I sent this out last week but here is a little more info.
Hopefully someone can help with this.  It is driving me nuts.

         

        We have aabout 18 servers.  We built the 1st 11 with XP 1.0 CD.
then installed FR1.  Now we are upgrading them to FR3 and Loading all
new servers from 12 on, with the FR3 CD.  If i go into the CMC and then
Servers, then highlight an old server, i don't get all of the added
features from FR3 such as the Reboot Schedule, etc.  But if I look at
properties of one of the newer servers built with the FR3 cd then the
reboot schedule and other new features are there.  Also, with the Reboot
Schedule feature, if i choose apply to other servers, it only lists the
newer servers.  I have checked the Set Feature release option and it is
set to FR3 and I have checked the Product Code.   It is all set
properly.  

        
        Anyone have any ideas on this.  I need to get this fixed asap.

         

        Thanks,

        _________________________________
        
        Michael Boggan
        Network Engineer/Citrix Admin
        Virtual Desktop Inc.
        Dallas, Texas
        Ph: (972) 960-6400
        Fax: (972) 960-6445
        email: mboggan@xxxxxxxxxxx
        http://www.virtualdesktopinc.com
<http://www.virtualdesktopinc.com/> 
        _________________________________
        
        For Technical Support during business hours please send email to
support@xxxxxxxxxxx or call the above toll free number for afterhours
support.

Other related posts: