[THIN] Re: AW: Re: Windows cannot load your profile. Please increase the registry size and restart the computer.
- From: "Landin, Mark" <Mark.Landin@xxxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 27 Oct 2004 10:04:42 -0500
Joe,
Correct me if I'm wrong (and I may be), but if the server gets rebooted every
night, that pretty much solves any problem with stuck user profiles, doesn't it?
________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Joe Shonk
Sent: Wednesday, October 27, 2004 10:01 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: AW: Re: Windows cannot load your profile. Please
increase the registry size and restart the computer.
How many users are connecting to this server? What is the size of the
ntuser.dat of these users? And are you sure that the user's hive is being
unloaded properly when the log off? Are you running UPHClean and have you
enable event logging for UPHClean?
Joe
________________________________
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On
Behalf Of Nuno Jose Sequeira
Sent: Wednesday, October 27, 2004 7:26 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: AW: Re: Windows cannot load your profile. Please
increase the registry size and restart the computer.
Well... as Torben said, even increasing the registry size to above
200Mb will not work. I used 256Mb and despite the average of the server's
registry being 130Mb it still continues to give the message and not allowing
the users to connect....
________________________________
From: Claus, Torben [mailto:Torben.Claus@xxxxxxxxxxxxxxxxxxx]
Sent: quarta-feira, 27 de Outubro de 2004 14:57
To: thin@xxxxxxxxxxxxx
Subject: [THIN] AW: Re: Windows cannot load your profile. Please
increase the registry size and restart the computer.
Mmh - NTREGOPT will compact the physical Size of the Registry on the
HDD not the content inside
- so for that case here it don't do anything to solve the Problem...
From the Author:
"Note that the program does NOT change the contents of the registry in
any way,"
Correct me plz if I'm wrong...
greetings
Mit freundlichen Grüßen
Torben Claus
HKL BAUMASCHINEN
Lademannbogen 130
22331 Hamburg
Tel: 040-53802-381
Fax: 040-53802-809
________________________________
Von: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] Im
Auftrag von Robert K Coffman Jr - Info From Data Corporation
Gesendet: Mittwoch, 27. Oktober 2004 15:24
An: thin@xxxxxxxxxxxxx
Betreff: [THIN] Re: Windows cannot load your profile. Please increase
the registry size and restart the computer.
Also a program called NTREGOPT will compact your registry files if they
have any whitespace in them. Make a repair disk before using!
- Bob Coffman
-----Original Message-----
From: Rick Mack [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of
Rick Mack
Sent: Tuesday, October 26, 2004 10:53 PM
To: thin@xxxxxxxxxxxxx
Subject: RE: [THIN] Re: Windows cannot load your profile.
Please increase the registry size and restart the computer.
Hi Nuno,
I assume you've maxed out the maximum registry size?
If the servers are still set to the defaults, then your problem
is quite simple, there's not enough registry space..
My Computer > properties > advanced > performance options >
change > registry size > maximum registry size.
Try 216 MB.
Used to see a problem in NT 4 where the software hive got too
big and really squeezed the amount of registry left to load user profiles. This
could conceivably also happen on win2k. Check the size of the Software hive
under \winnt\system32\config. If it's a lot bigger than about 40-45 MB, there
could be a problem.
regards,
Rick
Ulrich Mack
Volante Systems
________________________________
From: thin-bounce@xxxxxxxxxxxxx on behalf of Nuno Jose Sequeira
Sent: Wed 27/10/2004 12:44 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Windows cannot load your profile. Please
increase the registry size and restart the computer.
Hi,
The servers reboot every day at night, and everyday (when the
connections are intense) we have that same message:
Windows cannot load your profile. Please increase the registry
size and restart the computer.
Windows cannot log you on because the profile cannot be loaded.
Contact your network administrator.
DETAIL- Insufficient system resources exist to complete the
requested service.
But how about those settings on PagedPoolSize and
PoolUsageMaximum? Do you think it should be removed? How can I fix this?
Thanks.
Nuno
________________________________
From: Landin, Mark [mailto:Mark.Landin@xxxxxxxxxxxxxxxx]
Sent: terça-feira, 26 de Outubro de 2004 15:23
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Windows cannot load your profile. Please
increase the registry size and restart the computer.
The telling sign would be if the behavior persists across
reboots. If a reboot doesn't make the error go away, then it's not anything
UPHClean is going to fix.
I had this same problem some time ago and the answer was indeed
to twiddle the PagedPoolSize and PoolUsageMaximum. If that doesn't work, I'm
stuck.
________________________________
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Joe Shonk
Sent: Tuesday, October 26, 2004 8:28 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: Windows cannot load your profile.
Please increase the registry size and restart the computer.
Download and install UPHClean from the Microsoft web
site. This could due to profile not unloading properly and stealing system
resources.
Joe
________________________________
From: thin-bounce@xxxxxxxxxxxxx
[mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Nuno Jose Sequeira
Sent: Tuesday, October 26, 2004 5:00 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Windows cannot load your profile.
Please increase the registry size and restart the computer.
Our customer is having problems with their Citrix
servers:
4 Citrix MTF XPe FR3 servers w/ 60 users (1 server with
4Gb RAM, 1 with 1,5Gb, another with 1Gb and the last one with 700MB)
They are getting this error ID: 1000
Windows cannot load your profile. Please increase the
registry size and restart the computer.
Windows cannot log you on because the profile cannot be
loaded. Contact your network administrator.
DETAIL- Insufficient system resources exist to complete
the requested service.
I've used many Microsoft's advices like:
http://support.microsoft.com/kb/312362/EN-US/
And setup the registry on ALL the servers like:
RegistrySizeLimit = 256Mb
AND
Value name: PoolUsageMaximum
Data type: REG_DWORD
Radix: Decimal
Value data: 40
Setting the value at 40 informs the Memory Manager to
start the trimming process at 40 percent of PagedPoolMax rather than the
default setting of 80 percent.
Value name: PagedPoolSize
Data type: REG_DWORD
Radix: Hex
Value data: 0xFFFFFFFF
Setting PagedPoolSize to 0xFFFFFFFF allocates the
maximum paged pool in lieu of other resources to the computer.
This setting consumes a lot of Page Swap, and I've also
found out that we are still having the same MSG error mainly on the 4Gb RAM
server and on the 1.5Gb RAM!
Could you please help us?
This is becoming critical and users cannot login to the
servers!!!
Thanks.
Regards,
Nuno
#####################################################################################
This e-mail, including all attachments, may be confidential or
privileged. Confidentiality or privilege is not waived or lost because this
e-mail has been sent to you in error. If you are not the intended recipient any
use, disclosure or copying of this e-mail is prohibited. If you have received
it in error please notify the sender immediately by reply e-mail and destroy
all copies of this e-mail and any attachments. All liability for direct and
indirect loss arising from this e-mail and any attachments is hereby disclaimed
to the extent permitted by law.
#####################################################################################
#####################################################################################
This e-mail, including all attachments, may be confidential or
privileged. Confidentiality or privilege is not waived or lost because this
e-mail has been sent to you in error. If you are not the intended recipient any
use, disclosure or copying of this e-mail is prohibited. If you have received
it in error please notify the sender immediately by reply e-mail and destroy
all copies of this e-mail and any attachments. All liability for direct and
indirect loss arising from this e-mail and any attachments is hereby disclaimed
to the extent permitted by law.
#####################################################################################
Other related posts:
