[TechAssist] Re: sharp ca29t729 tv. horizontal out gets too hot, all measurements seem okay
- From: Eric Manuel <tvman@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 15 Oct 2001 17:15:25 -0230
Hi Wilf look for a small electro cap near the horizontal driver
transformer maybe 1 mfd or so change it..Eric
"W. Blakey" wrote:
>
> I have a Sharp tv that I have replaced the HOT (shorted E-C) and the new one
> gets rather warm also. The B+ is about 125 (I think or 135v), I believe the
> timing on the collector pulse is 10us or slightly less(reading with Sencore
> SC60scope) and there is no noise on the hor signal from the driver. I do not
> have a schematic and am not sure where else to look.
> Wilf Blakey/Blakey TV,Kirkland Lake,Ont
> wblakey@xxxxxxxxxxxxxxxx
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
