NO, you might try adjusting coil L12303 for +3.9 volts on pin 49 of U16201 this sometimes seems to help Thomson says the micro gets a false broadcast signal from the tuner to mute audio, as yet they have no cure. You wil notice this loss of audio does not happen with video inputs only tuner Robert supertek66@xxxxxxxxxxx robert_herring@xxxxxxxx H&H Electronics Inc Dallas,Tx. 75233 ----- Original Message ----- From: <damon101@xxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, October 04, 2001 2:11 AM Subject: [TechAssist] Re: rca ctc197cd > > Have you reset the EEPROM using chipper check?? > > ----- Original Message ----- > From: "albert marquardt" <ampm@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, October 03, 2001 5:33 PM > Subject: [TechAssist] rca ctc197cd > > > > > > unit had no sound, unplugged and had sound. 2 months later,same thing no > > sound, is there a modification or something i can do. > > al marquardt > > ampm@xxxxxxx > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.