[TechAssist] pioneer pro99 model led goes to green and shuts off.
- From: "Avery Boyd" <adBoyd@xxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 28 Nov 2005 11:49:51 -0600
Working on a pioneer pro99 model. In the home I brought the chassis in
resoldered the sweep board. Took it back, the set would take about 60seconds
to let the green led light up and it look like the convergence was out. Took
the convergence board to the shop instslled stk392-150 in place of the
stk392-110, couldn't find any thing else bad on the board, took it back to
house, the convergence still bad. Brought the set to the shop. Would someone
know what the convergence voltages should be and where they come from?
Thanks Avery.Avery Boyd
4666B S. Mingo
Tulsa OK 74146
Phone 918-665-2400
-----------------------------------------------------------------------------
This Email List is accessible to the general public through search engines.
Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
