have you checked the electrolytic filter capacitors? They might look ok until powered up... do you have a capacitance meter? Stefaan Van Slycken Van Slycken Elektro - Waasmunster, Belgium ----- Original Message ----- From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, December 08, 2002 10:24 PM Subject: [TechAssist] amplifier problem - buzz on outputs > > Hello, I have an audio amplifier(150W) (240V at 50Hz) that is giving me a > headache! > The linear power supply seems to have a problem here. > The output to the speakers gives a buzz on both speakers and no audio > signal. > The transformer in the power supply starts off cool but after 10 minutes is > too hot too touch when I switch it off. > I have checked all the components in the linear power supply and they seem > ok. > The transformer is giving me outputs of 10Vac and 22Vac > Any ideas to track this one down. It is a fairly old amplifier. > Regards babalino > > Mr D Graham > Grahams Electronics > 978 Walker Road > Newcastle upon Tyne > England > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html