[TechAssist] Re: Zenith Z25X31D Complete convergence assy.
- From: "C&W Electronics" <c_w_electronics@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 25 Jan 2002 18:13:55 -0600
Jerry,
ANY convergence assy from a 25" will work on this set, unless it is a bonded
yoke crt. Even then you can use the neck rings and usually converge the set.
It doesn't have to be from a Zenith.
Good hunting.
Paul W
C&W Electronics
From: knitrngr65@xxxxxxx
Reply-To: techassist@xxxxxxxxxxxxx
To: techassist@xxxxxxxxxxxxx
Subject: [TechAssist] Zenith Z25X31D Complete convergence assy.
Date: Thu, 24 Jan 2002 19:25:12 EST
Does anyone have a complete convergence assy, for the unit mentioned in the
subject line?
Thanks,
Jerry H.
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
