[TechAssist] Re: Zenith SM2727RK - UPDATE
- From: AL LEATHERMAN <alleathe@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 18 Oct 2001 00:15:22 -0400
chasm,
Here is the scan. Good luck. Do not mention my hand drawn stuff on the
public part. al
May God give us strength
Al's TV
224 Rt. 46
Mine Hill, NJ. 07803
973-361-5796
alleathe@xxxxxxxxxxxxx
----- Original Message -----
From: "Chaz" <chaz@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, October 17, 2001 11:31 PM
Subject: [TechAssist] Zenith SM2727RK - UPDATE
>
> For all those following this thread: recently, I did a little more
cleaning of the
> PCB to get a better viewing of previously described burnt parts. After
doing
> so, discovered that the diodes - CR3431 to CR3434 - weren't, afterall,
burnt.
> Just tarnished badly by the explosion from a TO-92 transistor - Q3431. My
> diode tester says they are bad.
>
> So, what I need is at least a partial schem of the section showing the
above
> diodes, Q3431, ICX3431, and burnt resistor R3432. I will attempt a repair
> with replacement of these parts, depending on cost/avail. of STR53041,
> without CRT connected. If the board then functions, it gets my other CRT
> with it and hopefully returns to service. If not, this project will be
dumped.
>
> Thanks to everyone who has offered suggestions so far and/or further
> continues to offer help.
>
> Thanks in advance.
> Chaz
> -------
>
> >
> > Late yesterday, I recieved a hi-fi Zenith TV that had been hit with
lightning
> > (SM2727RK). I checked everything on Tech- Assist, even for close
numbers,
> > and found nothing.
> >
> > Visual inspection shows blown FX3401 fuse, and what looks like the p.s.
> > bridge of diodes (burnt) close to the ICX3431 (I believe) STR????
regulator. I
> > can't read anything on these diodes nor make out well the PCB location
> > descripts. I also suspect that the STR4400 (not able to read well
either) volt-
> > reg is shorted - ohming it says so anyway. Without knowing what these
> > parts are, and resourcing cost of regulator, I can't do much with it
right now
> > w/o chancing more part damage. Customer wants it fixed but also is a
little
> > short on budget. Anyone have any ideas, schem, or tips on this. Part
> > descriptions would be a big help to start with.
> >
> > I'm not sure of the chassis number for this but, the only label I found
in the
> > unit shows SM2727Rk EU-593 F49702 (numbers under each other).
> >
> > Customer had said before it got hit with lightning, that the video would
go out
> > (white screen) and after powering off to cool down, the video would
appear
> > again. He said he "just lived with it until this happened".
> >
> > Thanks in advance.
> > Chaz
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
> >
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
