9-1268 module is available here http://www.tvparts.com/ for $65 exchange & the 9-1235 is $62 exchange. Dave Huston Huston TV & Electronics Marion, Ohio 43302 DaveHuston@xxxxxxxxxxxx (740) 389-5726 voice & fax. ----- Original Message ----- From: "Wilfred Blakey" <wblakey@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, December 24, 2002 4:56 PM Subject: [TechAssist] Re: Zenith SL2784BT 9-1235/9-1268 DEAD > > I wouldn't mind being in your place once in awhile as my customers keep > asking if I have any big tvs for sale used and I can't seem to get any. > About two weeks ago a gentleman wanted to give me a 32" Sanyo because he did > not want to pay for a solder job on the degause circuit. I went there and > did not have a cart to help carry it so told him I would be back shortly. I > phoned about one week later and he had thrown it in the dump. Oh, well so > much for that one. > Blakey TV > Kirkland Lake,Ont.,Canada > ----- Original Message ----- > From: "Peter oliver" <oliver_peter1@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, December 24, 2002 4:18 PM > Subject: [TechAssist] Re: Zenith SL2784BT 9-1235/9-1268 DEAD > > > > This sweep board (9-1268-02) is a rebuilt board so it is not the first time > this happpened. I tested the CRT with another zenith chassis (a 1400 series) > it runs ok. I tried a larger fuse 3A for the old smoke test.. There is a > massive amount of curent being drawn across the horzontial driver transistor > and the drive transformer they start to smoke without shorting???. The HOT > remains cold so it is probbably chassis time. The customer did not want to > spend the money for a new/refurb chassis. so they may call for it or I may > get stuck with it It's a nice set pip, SVHS, 2 video inputs, outputs ...27" > so I may end up fixing it anyway. Its weird people have been giving me a > number of 27" + sets lately, good brands like Sony, MAgnovox, Panasonic.. > > > Peter Oliver > Tucson Radio TV > > > > > > > From: "Bob@Bobs tv" <woodman1@xxxxxxxx> > Reply-To: techassist@xxxxxxxxxxxxx > To: <techassist@xxxxxxxxxxxxx> > Subject: [TechAssist] Re: Zenith SL2784BT 9-1235/9-1268 DEAD > Date: Tue, 24 Dec 2002 10:58:06 -0500 > > > Hi Pete, > With fuse blown check HOT collector, if B+ there, power supply > probably ok. There have been problems with the audio panel soldered to the > main board. There is a small two wire cable from the SMPS that plugs in near > the metal box audio panel, unplug it. With jumpers hookup another fuse and > try set. Another point don't get to involved as these are the sets with the > bad A68AGD picture tubes. > Bob, > > Bobs TV Worcester, ma > > woodman1@xxxxxxxx > > Main 508-853-1482 > Fax 508-853-1480 > ----- Original Message ----- > From: "Peter oliver" <oliver_peter1@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, December 24, 2002 12:40 AM > Subject: [TechAssist] Zenith SL2784BT 9-1235/9-1268 DEAD > > > > > > Zenith > > model SL2784BT > > Split flat chassis 9-1235 main 9-1268 sweep/smps > > Customer complaint lost picture had sound then dead. > > Took apart and checked found H.O.T blown and secondary b+ fuse blown > > > > So Checked for bad connections, sested some surrounding electrolitics and > > replaced parts turn on pops fuse. HOT ok > > MAybe it's too close to chistmas and too long of a day but this one is a > > little strange > > > > Replaced Q3208 1148-01 sub'd 2sd1880 > > FX3408 2A 250V pigtail > > > > There aren't any obvious shorts or any 'smoking guns' to speak of. > > I guess I could replace the board if it's avalible, I haven't checKed yet > > Its been a busy day everbody wants stuff before christmas. > > > > > > > > > > Peter Oliver > > Tucson Radio TV > > > > > > > > > > _________________________________________________________________ > > MSN 8: advanced junk mail protection and 3 months FREE*. > > > http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=747 > 4&SU= > > > http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_advancedjmf > _3mf > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > > _________________________________________________________________ > Add photos to your e-mail with MSN 8. Get 3 months FREE*. > http://join.msn.com/?page=features/featuredemail&xAPID=42&PS=47575&PI=7324&D > I=7474&SU= > http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_addphotos_3 > mf > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html