Hi Phil, If your picture is bowed inwards, we have found the 2200uf cap in the vertical to be the fault. Keith Trumbla O/O B.E.M Electronics Inc. Est.1954 839 Ellice ave. Winnipeg Manitoba, Canada R3G 0C3 Ph.(204)775-2875 Fax(204) 774-9192 www.bemelectronics.com from: Phil Bader <philbad@xxxxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Zenith SG2799Y3 (split chassis design) pin cushion] >Date: Mon, 16 Sep 2002 12:37:02 -0400 > > > > > >Zenith SG2799Y3, uses "split-chassis" design with a a 9-1075 >power/deflection board. >After replacing the fuse (storm damages) unit works, but has a noticable >side pincushion distortion.Not enough to pull in the sides severly, but >a bow. Probably the customer was living with this until the storm blew >the fuse. I assume the problem is on the 9-1075 smps/defl module, but >what? >Phil Bader >-- >Philip Bader >Jan Phyl TV Inc. (estab. 1976) >3420 Recker Hwy. Winter Haven, Fl. 33880 >Fax (863) 299-8821 >email: philbad@xxxxxxxxxx > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ _________________________________________________________________ Join the world?s largest e-mail service with MSN Hotmail. http://www.hotmail.com ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/