[TechAssist] Zenith SG2799Y3 (split chassis design) pin cushion]
- From: Phil Bader <philbad@xxxxxxxxxx>
- To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Mon, 16 Sep 2002 12:37:02 -0400
Zenith SG2799Y3, uses "split-chassis" design with a a 9-1075
power/deflection board.
After replacing the fuse (storm damages) unit works, but has a noticable
side pincushion distortion.Not enough to pull in the sides severly, but
a bow. Probably the customer was living with this until the storm blew
the fuse. I assume the problem is on the 9-1075 smps/defl module, but
what?
Phil Bader
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: philbad@xxxxxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
