The boards go bad? Do you mean the sockets? I don't see any leaks. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Electric Medic" <info@xxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, August 03, 2004 11:47 PM Subject: [TechAssist] Re: Zenith PTV PV5263BT red keeps going out of focus > I wouldn't rule out the CRT boards either. I have seen far more of those bad > than the blocks. I change all three almost on every job on those. Fluid > slowly destroys them. I very seldom see a good one come in even with other > problems. > > Perry Bower > Electric Medic > "It's Cheaper to Keep Her" > http://www.electricmedic.com > Check out the Electronic Repair Screensaver We created. More Images to come! > To download these Collections you must first install the Eyetide Viewer: > http://www.eyetide.com/download/?s=O3OfmSLHXygGHCv1W6Gz3Bgjtq3DNNMNdcKsYSVGC > "We're Number One Where it Really Counts, With our Customers" > 3850 Washington Road Suite 5b > Martinez, Georgia 30907 > Phone: 706-8MEDIC4 (863-3424) > Phone: 706-863-3474 > Fax: 706-863-2316 > mailto:info@xxxxxxxxxxxxxxxxx > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Shoreline > Electronics > Sent: Saturday, July 31, 2004 10:38 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: Zenith PTV PV5263BT red keeps going out of > focus > > > Focus block. To confirm swap a focus line from the red and the green. > > ================================= > Jeff Stielau > Shoreline Electronics Repair > 344 East Main Street > Clinton,CT 06413 > (860)399-1861 > (860)664-3535 FAX > jstielau@xxxxxxxx > ================================= > ----- Original Message ----- > From: "al m" <ampm@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, July 30, 2004 6:51 PM > Subject: [TechAssist] Zenith PTV PV5263BT red keeps going out of focus > > > > This set I sold to my buddy and now the red keeps going out of focus. Is > > this a indication of a bad splitter or a bad focus block? It can be > adjusted > > back in but doesn't stay in. > > Al Marquardt > > ampm@xxxxxxx > > Al Marquardt Electronic Repair > > 206 W Main > > Girardville Pa. 17935 > > > > > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > > -------------------------------------------------------------------------- -- > - > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/