Jeff the filaments come out of pins 8 & 5 of flyback. RX3207 and RX3208 are after that on pin 8. RX3207 is 1ohm 1W and RX3208 is 5.6ohms at 3W it looks like. They go to Daughter board. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Shoreline Electronics" <jstielau@xxxxxxxx> To: "Tech Assist Group" <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 03, 2004 8:35 AM Subject: [TechAssist] Zenith 9-1302-02 Filament Path Needed > Make : Zenith > Model : PV4661RK > Module 9-1302-02 > > Lost the filament on this one......connections are OK on the standup > module. > Can anyone tell me where the filament originates on this module OR a scan > of > the circuit? > > ========================== > Jeff Stielau > Shoreline Electronics Repair > 344 East Main Street > Clinton,CT 06413 > 860-399-1861 > 860-664-3535 (fax) > jstielau@xxxxxxxx > ======================== > "If you push something hard enough it will fall over." > Fudd's First Law of Opposition - Sir Sidney Fudd > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/