[TechAssist] Re: Toshiba Model # CF2647 need print FIX
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 17 Apr 2004 19:05:27 -0400
Thanks to Jim and Eric (see below) the culprit was CZ07. Thanks a million
fellas that saved me a lot of time. Now that's what this list is all about.
HIP HIP HOORAY.
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
----- Original Message -----
From: "Jim Myers" <jr.myers@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, April 17, 2004 2:27 PM
Subject: [TechAssist] Re: Toshiba Model # CF2647 need print
> I have that CF2647 print and CZ07 is a 3.3UF/50V from pin 10 of ICZ04 to
> ground. ICZ04 is a 16 pin DIP TL8608P used as a 1H delay CCD. that
> chassis is TAC8741 BTW. HTH.
>
****************************************************************************
***************************************
> Since 1972
> Jim Myers
> Telrad Electronics
> Fort Wayne, Indiana
>
> tvman@xxxxxxxxxxxxxxx wrote:
> > Hi Al see if you can find CZ07--3.3 @50 volts I dont
> > know the location# but I saw this tip for steaking when
> > letters on the screen..eric
> > Eric Manuel
> > E M Electronics
> > Deer Lake Nfld
> > Canada-709-635-2627
> > ----- Original Message -----
> > From: "Andrew Rose" <badandy2@xxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Saturday, April 17, 2004 3:20 PM
> > Subject: [TechAssist] Re: Toshiba Model # CF2647 need print
> >
> >
> >
> >>I have a notation on cx2667 print that it is the same as cf2647 but I
> >
> > don't
> >
> >>remember if you want it I can send it out Monday
> >>Andrew rose
> >>action TV
> >>----- Original Message -----
> >>From: "al m" <ampm@xxxxxxx>
> >>To: <techassist@xxxxxxxxxxxxx>
> >>Sent: Saturday, April 17, 2004 1:10 PM
> >>Subject: [TechAssist] Toshiba Model # CF2647 need print
> >>
> >>
> >>
> >>>Does anyone have a print or a tip for video streaking when writing
comes
> >>
> >>on
> >>
> >>>the screen? I changed all the power supply caps and all the caps around
> >>
> >>the
> >>
> >>>regulators but I still have it. I would think it is a power supply in
> >
> > the
> >
> >>>video section but I have no print. Yes I changed the 200V cap too.
> >
> > Thanks.
> >
> >>>Al Marquardt
> >>>ampm@xxxxxxx
> >>>Al Marquardt Electronic Repair
> >>>206 W Main
> >>>Girardville Pa. 17935
> >>>
> >>>
> >>>
> >>
>
>>--------------------------------------------------------------------------
> >>---
> >>
> >>>Lost Password:
> >>>http://www.tech-assist.org and select "Login Problems?".
> >>>Email Archives:
> >>>//www.freelists.org/archives/techassist/
> >>
> >>
>
>>--------------------------------------------------------------------------
> >
> > ---
> >
> >>Lost Password:
> >>http://www.tech-assist.org and select "Login Problems?".
> >>Email Archives:
> >>//www.freelists.org/archives/techassist/
> >
> >
> >
>
> --------------------------------------------------------------------------
---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
- » [TechAssist] Re: Toshiba Model # CF2647 need print FIX
