Is the 210 volts from the screen supply voltage from the fly? Try jumping a 10 MD. cap at 350volts to the screen resistors on the kine board and see if it improves. Neil Tv Doctors. > ** Original Subject: [TechAssist] Toshiba - CF35E50 - Dark Pix > ** Original Sender: Philstv@xxxxxxx > ** Original Date: Mon, 8 Oct 2001 16:29:43 -0500 (EST) > ** Original Message follows... > > Hi All. I have this set in the shop. The picture is dark (more predominantly > on the right side) It also has video smearing off to right of light images. > Turning up the screen shows a brighter pix but the smear stays. I've replaced > all the electrolytics that supply the 210V and some others in the video > circuit and vertical circuit. SAMS does not make a print for this set. > Toshiba TA says to replace the CRT or the PMUS02H module which I believe is > the P-I-P module. I've removed it from the set and still have the same > symptoms. I checked the CRT and it was OK. Any idea's? > > Phil - www.philstv.com > 34651 Ford Road > Westland, MI 48185 > 734-728-5925 > philstv@xxxxxxx > > Phil - www.philstv.com > 34651 Ford Road > Westland, MI 48185 > 734-728-5925 > philstv@xxxxxxx > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. >** --------- End Original Message ----------- ** > Download The Grinch Browser at http://www.meanone.com/grinchBrowser.html Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.