Bill I pulled out my file on this set.The audio section has caused some problems. Mainly the TA8200AH shorting out the +30 power supply.Another problem has to do with the DPC unit-it sticks up from the main board-check all the solder connections on this module and the main board. Also the yokes-if you can sub one in-or ring them. The convergence IC's will cause problems,but the set should run with those removed. Good Luck Joe Prokup PRO-ELECTRONICS ----- Original Message ----- From: "Bill S" <billans@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, January 04, 2002 12:27 AM Subject: [TechAssist] Toshiba 48" TP48E90 > > Hi all > > This Toshiba big screen came in (chassis # TAC9553) (Model # TP48E90) dead. > Hooked it up to the variac and saw the 'normal' bump up and then the set > shut off. I checked the HOT to see if that was shorted and it seems to be > good. I have looked at all the fuses in the power supply module and they > all check good. Nothing seems to be dead shorted. > I do not have a schematic for this. Are there any things that I should be > looking for that I have not done so yet. > > Thanks > > Bill > > Life is truely a blessing! > > > ------------------------------------------ > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.