[TechAssist] TA Zenith SR2552S 9-1558..colors messed up...not CRT.
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: "Techassist" <techassist@xxxxxxxxxxxxx>
- Date: Fri, 17 Sep 2004 22:01:05 -0400
When I first saw the problem, I rejuvenated the CRT..emissions were low on red
and blue. Rejuvenation was
successful and emissions look good. Picture brighter, but wrong colors.
Where I should have blue, it is green.
I checked every resistor on the CRT board..some I had to pull, they check fine.
Collect on blue transistor is over 200vdc. The other transistors are
considerable lower.
Does anyone have any idea where I can go from here without a schematic? Is the
problem the video proc. IC?
Thank you,
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
