There must be something obvious I am overlooking here. Sony KV27FS120 Does not respond to remote control, front panel switches ok. Menus intermittently appear. IR data is visible on the micro pin 70 SIRCS. Changed IR receiver. No help. Removed all front panel switches. No help. Changed micro. No help. On the micro, pin 42, 3.3v supply measures 3.1V. The voltage chart says it should be 3.3. L007 is where the voltage drop is occurring, 3.3 on the input, 3.1 on the output. I swapped coils l007 and L008 to see if 7 was breaking down under load. No change. Wayne Vanaman Omega Electronics 6904 W Fairfield Dr Pensacola, Fl. 32506-3310 Wayne@xxxxxxxxxxxxxxxxxxxxx WWW.PensacolaTVRepair.Com 850-456-5995 voice 850-458-6369 fax ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/