Sorry about the website. Correction http://community.webtv.net/mebonnell/SymphonicWF2703 Sender: techassist-bounce@xxxxxxxxxxxxx From: mebonnell@xxxxxxxxx(Old=A0TV=A0Man) Date: Wed, Feb 2, 2005, 6:41pm To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Symphonic WF2703 No video or sound Reply=A0to: techassist@xxxxxxxxxxxxx I appreciate your reply but all tact switches have been removed and replaced with a sturdy switch box because the inmates tear the plastic button out. I have tried to show the set up in the website below. http://community.webtv.net/mebonnell/SymphonicWF2703 If I get it fixed will post it. Sender: techassist-bounce@xxxxxxxxxxxxx From: ampm@xxxxxxx(al=3DA0m) Date:= Wed, Feb 2, 2005, 5:23pm (CST+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Symphonic WF2703 No video or sound Reply=3DA0to: techassist@xxxxxxxxxxxxx Bad channel Button? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Old TV Man" <mebonnell@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 02, 2005 12:46 PM Subject: [TechAssist] Symphonic WF2703 No video or sound When I turn this on it just continously runs thru the channel numbers. I have the service manual and all voltages seem good. Any ideas? Max Bonnell Bonnell TV Robinson, IL ---------------------------------------------- ---------------------------------------------- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/