hi Bruce: i don't know the exact parts number of the flyback,but it usually stamped on the flyback itself.if you want to find out price,you can phone lg(zenith) parts @ 905-568-6800 or 1-888-542-2623. tony.----- Original Message ----- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 08, 2002 6:45 AM Subject: [TechAssist] Re: Subject: Zenith SL2784 (1994) No Start, blown H.O.T. > > Yes Tony, the fuse is open and H.O.T blown ,could still be bad flyback even > though it checks good. In case it is , what are you paying for them out your > way? Do you have a part number for this piece. The power supply is running > as far as I can tell. Can you pass on the information to confirm the horiz > drive location unless it is scan derived. If it is there will probably not > need a print. > > thanks > Bruce. > > ----- Original Message ----- > From: "Tonys TV" <tonys.tv@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, October 07, 2002 5:04 PM > Subject: [TechAssist] Re: Subject: Zenith SL2784 (1994) No Start, blown > H.O.T. > > > > > > hi Bruce: > > i've work on many of this mosule (9-1268).if the hop transistor > > shorted,normally is caused by faulty flyback transformer,also check for > open > > fuse toward the front of the module.i have the schematic (only one > page,big > > page).if you need it,i could fax it to you.give me your fax number. > > tony @ tony's tv in victoria bc > > phone:(250)595-5588 > > fax:(250)595-1777. > > > > ----- Original Message ----- > > From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx> > > To: "Techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx> > > Sent: Monday, October 07, 2002 1:06 PM > > Subject: [TechAssist] Subject: Zenith SL2784 (1994) No Start, blown H.O.T. > > > > > > > > > > Help needed, > > > > > > > Zenith SL2784BT (9-1268) Print ? Part information?.Needed. Audio > > working, > > > > no H.V. > > > > > > > Does any one have a print to loan on this 9-1268 module. Flyback rings > > > good? > > > > I have 157 B+ .The Regulator circuit does not seem to be working > > properly. > > > > This set had both 2 amp fuses blown. and H.O.T blown. Replaced blown > > parts > > > , > > > > audio only working, will not start. > > > > Soldered poor connections on sweep board. The picture tube probably > > caused > > > > the output to go and damaged the regulator circuit. The regulator does > > not > > > > seem to be turned on , very distorted waveform. Multiple problems may > > not > > > be > > > > worth repairing, or buying print. Picture tube still questionable. > > > > thanks for any information, > > > > Bruce. > > > > > > > > B&T Electronics > > > > 139 Margaret St > > > > Sarnia Ontario > > > > Canada > > > > N7T 2Y3 > > > > (519) 344-1850 > > > > btied@xxxxxxxxxxxx > > > > > > > > > ------------------------------------------ > > > To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > > To CHANGE your email address, click here: > > > http://www.techassist.net/forms/change.html > > > ------------------------------------------ > > > ***NEW*** Tips Added Instantly!!!*** > > > Submit Repair Tips here: > > > http://www.tech-assist.org/secure/tip/ > > > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > ------------------------------------------ > > ***NEW*** Tips Added Instantly!!!*** > > Submit Repair Tips here: > > http://www.tech-assist.org/secure/tip/ > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/