[TechAssist] Subject: Zenith SL2784 (1994) No Start, blown H.O.T.
- From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
- To: "Techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Mon, 7 Oct 2002 16:06:19 -0400
Help needed,
> Zenith SL2784BT (9-1268) Print ? Part information?.Needed. Audio working,
> no H.V.
> Does any one have a print to loan on this 9-1268 module. Flyback rings
good?
> I have 157 B+ .The Regulator circuit does not seem to be working properly.
> This set had both 2 amp fuses blown. and H.O.T blown. Replaced blown parts
,
> audio only working, will not start.
> Soldered poor connections on sweep board. The picture tube probably caused
> the output to go and damaged the regulator circuit. The regulator does not
> seem to be turned on , very distorted waveform. Multiple problems may not
be
> worth repairing, or buying print. Picture tube still questionable.
> thanks for any information,
> Bruce.
>
> B&T Electronics
> 139 Margaret St
> Sarnia Ontario
> Canada
> N7T 2Y3
> (519) 344-1850
> btied@xxxxxxxxxxxx
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
