Shorted pin amp transistor, sorry dont have location number but it should be 2SA1301, also put a bunch of solder on the sweep board. Tony Saracco TCS ELECTRONICS 406 Andra Ct. Gilberts, IL 60136 tcselectronics@xxxxxxxxx ----- Original Message ----- From: "Larry E" <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 23, 2004 5:46 PM Subject: [TechAssist] Sony KP61XBR38, AP chassis Convergence or pincushion? > Hi Guys, went out and replaced both Convergence IC`s 5 weeks ago > on this Sony, set looked great, used original Sony STK4278L`s, > originally had an hourglass shape. Went out yesterday and picture > is pincushioned on both sides and picture is way too wide, print > at bottom left and right is off screen, I didn`t have print with me > so I checked fuses, voltages to the IC`s, all are good, adjusted > pincushion, bow etc. but all 3 colors are equally bowed on each side, > and pincushion adjustment is minimal, Looking at the print there > doesn`t seem to be a master Horizontal size control, I`m thinking I > may have a pincushion problem because voltages are good and the > STK`s are not running hot, will be going back out to customer with > schematic tomorrow but thought I would ask for ideas before going. > This model is the same as, 46xbr35, 53xbr35, 46xbr25, 46v15, > 41exr95, 41exr96 etc. > Thanks in advance, Larry E > > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/