[TechAssist] Re: Sony KP51HW40 Brite Pix Then Shutdown
- From: "Shoreline Electronics" <jstielau@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 4 Jun 2004 08:48:00 -0400
If it's bright white then yes , 200V line is a good call. If it's a
primary color........may be other issues.
==========================
Jeff Stielau
Shoreline Electronics Repair
344 East Main Street
Clinton,CT 06413
860-399-1861
860-664-3535 (fax)
jstielau@xxxxxxxx
========================
"If you push something hard enough it will fall over."
Fudd's First Law of Opposition - Sir Sidney Fudd
----- Original Message -----
From: "jonas miglinas" <miglinasj@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, June 04, 2004 8:09 AM
Subject: [TechAssist] Sony KP51HW40 Brite Pix Then Shutdown
> Morning everyone,
> Will have a service call tomorrow on the above model and don't have a
print on this 2002 set. Client says set turns on with sound, but a bright
picture with retrace lines comes up for about 2 seconds then goes into
shutdown. I'm suspecting that the 200v to the video boards is missing.
Before I go, can someone see where the 200v is generated from? Or maybe
download the video circuit to the members area.
> Any other suggestions would be appreciated.
>
> Jonas Miglinas
> Miglinas TV
> Chicago
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
