Ed, I had the same set in for repairs last week and mine was the flyback.The lead coming off the flyback into the divider is real hard to remove.You need to push dn firm and then twist the wire and pull.Its not easy but there is a trick to this.If you still cannot remove the lead,then get some freeze spray and spray inside the divider where that lead goes into for 5 seconds.Now try again and I'm pretty sure it will come out. HTH. Mando Birdie's TV & Electronics Casa Grande, AZ PS There is a special tool that sony has for the removal of the wire but don't have the part #. Tel-Tek Electronics wrote: > Guys; > Need some advice on this set. > I want to eliminate the problem (shut Down) and isolate to either > Flyback or High Voltage Splitter. > Can I pull the lead from the Flyback to the HV block momentarily to > see > if it remains on, without doing damage. > > The other thing...is there a trick to removing the lead out of the > Flyback, do I need a special tool. > > As I said this is my first Sony R/P...used to doing Toshiba. > > Thanks; > > -Ed- > -- > Ed Gaidies > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/