Jim, that model might not have F402. I think it is the S560 model that has that. I worked on a S500 and it didn't have it. They are different generation players. Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca Jim Myers wrote: > > Did you check the two surface mount fuses on the solder side of the CD > board? If one is open, F402 I think, replace it with a jumper wire. Also > there are two resistors that you may have to change value. Check the > archive files for the information, it is there 5 or 6 times by now. > ******************************************************************************************************************* > Since 1972 > Jim Myers > Telrad Electronics > Fort Wayne, Indiana > > BOSS1996@xxxxxxx wrote: > > I replaced the laser assembly which includes the spindle motor, etc. Still > > won't read disc. Laser lights up, focus motor works as well as the sled > > motor. > > I went into the service menu where it would do a operation test and of > > course > > it said error. > > What I need is an explanation of the error codes provided in the service > > menu. > > Also, a scan of the service manual would be nice too. I thought I saw that > > someone had uploaded it but could not find it. > > Thanks, > > Robert Cardoza > > Picture Perfect Elec. > > Pembroke Pines, Fla 954-435-5868 > > > > > > ----------------------------------------------------------------------------- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ -- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/