Did you check the two surface mount fuses on the solder side of the CD board? If one is open, F402 I think, replace it with a jumper wire. Also there are two resistors that you may have to change value. Check the archive files for the information, it is there 5 or 6 times by now. ******************************************************************************************************************* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana BOSS1996@xxxxxxx wrote: > I replaced the laser assembly which includes the spindle motor, etc. Still > won't read disc. Laser lights up, focus motor works as well as the sled motor. > I went into the service menu where it would do a operation test and of course > it said error. > What I need is an explanation of the error codes provided in the service menu. > Also, a scan of the service manual would be nice too. I thought I saw that > someone had uploaded it but could not find it. > Thanks, > Robert Cardoza > Picture Perfect Elec. > Pembroke Pines, Fla 954-435-5868 > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/