DVD's Spindle Motor Spins at turn-on. Customer said DVD got stuck,he removed it,now Motor Spins Constantly,and the Tray will not open. I found a swelled and nearly vented cap on the DVD's PCB. PPE14 a 100uF/10v cap(I put in a 50v cap). Still the same symptom. I have no Service manual,nor is Tritronics any help on parts. I was expecting to have to purchase the entire DVD PCB,but it is not shown as a replacement part. There are app. a Dozen parts listed on Tritronics,but none are on the DVD PCB. BTW,there is a 4 Pin Regulator near that bad cap,KIA78R33AP1,Location number is PPIC1. Any manual/parts list/tips on this unit ??? Peggs Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 peggs@xxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/