DID YOU MAKE SURE THE CARRIAGE IS IN TIME WITH THE REST? ALSO I HAVE SEEN THE CARRIAGE GEARS GET GUMMED UP AND THE CASSETTE DOWN SWITCH WILL NOT RESPOND.HOPE THIS HELPS....GARY ----- Original Message ----- From: "Trac Dang" <t8872695@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, September 10, 2001 10:20 PM Subject: [TechAssist] Re: Sharp VCR model Vc-857U eject tape Display STOP all the time. > > I load the tape in at play mode position by hand. then I turn on power. then > it play ,FF,REW.Stop. But when I eject the tape out then insert in it reject > the tape again. > Weird. I did replace the mode switch.no fix > Dang TVCR > ----- Original Message ----- > From: Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Monday, September 10, 2001 12:59 PM > Subject: [TechAssist] Re: Sharp VCR model Vc-857U eject tape Display STOP > all the time. > > > > > > On some VCR's it is normal to display STOP if the tape is not playing. I > > thought it was displaying stop even if you press play. > > > > Jeff > > > > FAX 1-413-280-0677 > > Jeff Dougherty > > Intrepid Video & Electronics > > 501 Luther Rd > > Harrisburg, PA 17111 > > 717-909-8844 > > VCR tips, electronics info & general interest. > > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > > > > > ----- Original Message ----- > > From: "Trac Dang" <t8872695@xxxxxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Monday, September 10, 2001 1:20 PM > > Subject: [TechAssist] Re: Sharp VCR model Vc-857U eject tape Display STOP > > all the time. > > > > > > > > > > Hi Jeff. > > > I do not know why I push power button It show STOP on display . Is it > > normal > > > ?.If I remove 5pins socket on the switchmode assembly if will show DEW > on > > > display because dew sensor is removed.I checked switch mode .no thing > > wrong > > > .I turn by > > > hand the cam gear until it stops at starting point. > > > ----- Original Message ----- > > > From: Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Sunday, September 09, 2001 8:43 PM > > > Subject: [TechAssist] Re: Sharp VCR model Vc-857U eject tape Display > STOP > > > all the time. > > > > > > > > > > > > > > Dang, > > > > Since it is worse, I would guess the mode switch placement or timing > is > > > > incorrect. > > > > Also, check the pins for contact. > > > > When you say sometimes play, sometimes, not..doesn't leave us much to > go > > > on. > > > > What exactly happens when it doesn't play? > > > > Jeff > > > > > > > > FAX 1-413-280-0677 > > > > Jeff Dougherty > > > > Intrepid Video & Electronics > > > > 501 Luther Rd > > > > Harrisburg, PA 17111 > > > > 717-909-8844 > > > > VCR tips, electronics info & general interest. > > > > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > > > > > > > > > > > ----- Original Message ----- > > > > From: "tom lee" <t8872695@xxxxxxxxxxxxx> > > > > To: <techassist@xxxxxxxxxxxxx> > > > > Sent: Sunday, September 09, 2001 4:08 PM > > > > Subject: [TechAssist] Sharp VCR model Vc-857U eject tape Display STOP > > all > > > > the time. > > > > > > > > > > > > > > > > > > Hi techs. > > > > > I am working with vCR during weekend. First it eject tape but > > sometimes > > > > it > > > > > does not > > > > > sometimes play sometime not. I clean the mode swith. no fix. now It > is > > > > > worse. cassete > > > > > load in then eject out. with display stop all the time . power is > on > > > then > > > > > display stop. > > > > > any idea is appriciated. > > > > > Dang TVCR > > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > database better! Submit your fixes here: > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > To unsubscribe write to: > > > > > techassist-request@xxxxxxxxxxxxx > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > database better! Submit your fixes here: > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > To unsubscribe write to: > > > > techassist-request@xxxxxxxxxxxxx > > > > with unsubscribe in the subject line. > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.