Joel, The 9-1473 Convergence Generator Assy., on the C-8 chassis PTV, has 65 convergence controls, and 5 jumpers. You will need the Service manual to perform the convergence proceedure. There is nothing in the factory menu, for convergence parameters. I don't think it would be the same as the newer Z46Z83D model of the Zenith PTVs. I will loan out the Microfitche,....but, NOT the paper manual. Also,...Mike ask first,...so you would have to wait for him to finish with it, before sending it to you. I havn't heard from him yet,...so keep in touch, til we decide who gets it first. Let me know your mailing address. LLW LeRoy Westlund Westlund TV & Electronics " It's such a pretty world 93 North Main today !.... Centerfield, UT 84622-0087 Look at the Sunshine. " Ph./Fax 435-528-3822 :-) mailto:LLW@xxxxxxxxxx -----Original Message----- From: joel e sanford <jo-rope@xxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Friday, December 13, 2002 12:02 PM Subject: [TechAssist] Re: Service Manual for Zenith Projo PVR5263RK > > LLW< I have to also bother you for the info on the PVY5265 I am looking >for the convergance parameters I know that is on the microfisch?I want >to know if they are the same for a 46Z > > > >On Fri, 13 Dec 2002 10:52:37 -0700 "LeRoy Westlund" <llw@xxxxxxxxxx> >writes: >> >> Mike, >> Check for an open 110K 1/2 watt off C of horiz output on 9-1302 , >> may have a >> drop of glue on. >> I can send you the S/M on Microfitche, IF you have a reader. >> >> HTH, >> LLW >> >> LeRoy Westlund >> Westlund TV & Electronics " It's such a pretty world >> 93 North Main today !.... >> Centerfield, UT 84622-0087 Look at the Sunshine. " >> Ph./Fax 435-528-3822 :-) >> mailto:LLW@xxxxxxxxxx >> >> -----Original Message----- >> From: Michael OBeirne <michael@xxxxxxxxxxxx> >> To: Techassist@Freelists. Org <techassist@xxxxxxxxxxxxx> >> Date: Friday, December 13, 2002 6:05 AM >> Subject: [TechAssist] Service Manual for Zenith Projo PVR5263RK >> >> >> > >> >I really could use either this service manual or if someone could >> tell me >> >how to get into service mode (that's if it exists on this set) for >> this set >> >it would be a GREAT help. If you would email, copy and send it UPS >> on my >> >dime, COD it really doesn't matter. >> > >> >------------------------------------------ >> >Submit A Repair Tip For Everyone Here: >> >http://www.tech-assist.org/secure/tip/main.html >> >------------------------------------------ >> >To REMOVE your email address, click here: >> > http://www.tech-assist.org/unsubb.html >> >To CHANGE your email address, click here: >> > http://www.techassist.net/forms/change.html >> > >> > >> >> ------------------------------------------ >> Submit A Repair Tip For Everyone Here: >> http://www.tech-assist.org/secure/tip/main.html >> ------------------------------------------ >> To REMOVE your email address, click here: >> http://www.tech-assist.org/unsubb.html >> To CHANGE your email address, click here: >> http://www.techassist.net/forms/change.html >> >> >> > > >joel sanford >senior tech >chicago illinois 60628 >dba SPEEDY ELECT> >------------------------------------------ >Submit A Repair Tip For Everyone Here: >http://www.tech-assist.org/secure/tip/main.html >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html