Ken, From Tech Repair CD: Sanyo\DS31650\No audio* no audio or video on A/V input\\\\12V reg Q491 2SD400* circuit is different than Sams 3967\\\\\\\\ Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: <gulftech@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, October 18, 2004 4:20 PM Subject: [TechAssist] Sanyo DS31650, Dead after storm This unit came in dead after storm. I jumpered the power relay. Set comes up with picture, but no sound. Pressing power brings up OSD, but no sound, and clicks off in a few seconds. During that time before it clicks off, I can change the channel. I suspect the uP, IC801, but thought I would see if others have run into this one. Set was given to the shop, but I sure you use it to sell and make a buck. Any suggestions would be appreciated. Of course I have no schematic. TIA, Ken Smith Gulf Technical Services 3034 Gulf Breeze Parkway Gulf Breeze, FL 32563 850-934-8324 (Voice), 850-932-0819 (fax) ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/