Are the Horizontal and vertical signals getting back to the Micro on the first one? Did you put in IF on the second one? Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: <MHardin665@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 28, 2005 1:41 PM Subject: [TechAssist] Sanyo DS19390 schematic needed >I have 2 of these sets. 1 lacks OSD + Menu otherwise ok. Have changed sig > proc, upc, eeprom. > The other no signal, video, has raster, channel OSD. Have changed sig > proc, > tuner, eeprom, upc. > I really need a schematic to proceed any any toughts on the problem will > be > appreciated. > Thanks, > Marvin Hardin > Martronics > Armuchee, Ga. > > ----------------------------------------------------------------------------- > This Email List is accessible to the general public through search > engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/