Thanks Jeff . I forgot to mention that there is video on the cathodes . I don't know if it has the correct peak-to-peak value as I don't have prints for it but it looks to me to be in the ball park . I also checked the picture tube with the cr70 and it test good but I didn't think it was bad so I went ahead and checked it anyway . >From: "Shoreline Electronics" <jstielau@xxxxxxxx> >Reply-To: techassist@xxxxxxxxxxxxx >To: <techassist@xxxxxxxxxxxxx> >Subject: [TechAssist] Re: Samsung TXJ2554 chassis# K51A >Date: Tue, 9 Oct 2001 22:18:38 -0400 > > >Problem : No Video Blank Raster If Screen Turned Up > >Fix : Ic201 Tda8377a Samsung # 1204-001170 $47.95 > >Do you have video information on the cathodes? > > >Jeff Stielau >Shoreline Electronics Repair >125 Beechtree Lane >Westbrook,CT 06498 >860-399-1861 Voice >860-664-3535 Fax >jstielau@xxxxxxxx > >----- Original Message ----- >From: "Barry Appleby" <burintv@xxxxxxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Tuesday, October 09, 2001 10:10 PM >Subject: [TechAssist] Samsung TXJ2554 chassis# K51A > > > > > > This tv has sound but no raster or osd [totally black screen] . High >voltage > > and focus is ok and the heater voltage is 6.3v . The 200v on the crt is >ok > > and the RK , BK and GK all have approximately 190v . The screen voltage >will > > only go to 165v . With the crt board removed it's the same . I removed >the > > screen connection at crt and measured the resistance to gnd and it >adjusts > > from 1.8meg to 30meg . I also replaced c518 the 103z/3kv screen cap . >Could > > this be a bad flyback ? The customer told me the picture would appear >once > > and a while when it first started to act up but now it doesn't . Thanks >. > > Barry Appleby > > Burin Tv Repair > > burintv@xxxxxxxxxxx > > Burin NFLD > > > > _________________________________________________________________ > > Get your FREE download of MSN Explorer at >http://explorer.msn.com/intl.asp > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > >Help make your TechAssist online repair tips >database better! Submit your fixes here: >http://www.circuitwork.com/techassist/tip/#tips >To unsubscribe write to: >techassist-request@xxxxxxxxxxxxx >with unsubscribe in the subject line. _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.